From 28f23e9340690cc9435086e10abd575c65684815 Mon Sep 17 00:00:00 2001
From: Ondrej Jirman <megous@megous.com>
Date: Sun, 7 Nov 2021 20:09:02 +0100
Subject: [PATCH 259/446] power: supply: rk818-charger: Implement charger
 driver for RK818 PMIC

For now this driver is just meant to watch Type-C power supply
and apply current limits to RK818, to not overload the Type-C
partner.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 drivers/mfd/rk808.c                  |   1 +
 drivers/power/supply/Kconfig         |   8 +
 drivers/power/supply/Makefile        |   1 +
 drivers/power/supply/rk818_charger.c | 637 +++++++++++++++++++++++++++
 4 files changed, 647 insertions(+)
 create mode 100644 drivers/power/supply/rk818_charger.c

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 3d53e4cde..e44b1c70b 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -207,6 +207,7 @@ static const struct mfd_cell rk818s[] = {
 	{ .name = "rk808-clkout", },
 	{ .name = "rk808-regulator", },
 	{ .name = "rk818-battery", .of_compatible = "rockchip,rk818-battery", },
+	{ .name = "rk818-charger", .of_compatible = "rockchip,rk818-charger", },
 	{
 		.name = "rk808-rtc",
 		.num_resources = ARRAY_SIZE(rtc_resources),
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index f5d443450..6bf0834b5 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -862,4 +862,12 @@ config BATTERY_RK818
 	  If you say yes here you will get support for the battery of RK818 PMIC.
 	  This driver can give support for Rk818 Battery Charge Interface.
 
+config CHARGER_RK818
+	bool "RK818 Charger driver"
+	depends on MFD_RK808
+	default n
+	help
+	  If you say yes here you will get support for the charger of RK818 PMIC.
+	  This driver can give support for Rk818 Charger Interface.
+
 endif # POWER_SUPPLY
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 1c725ee8d..3a1526f7d 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -105,3 +105,4 @@ obj-$(CONFIG_BATTERY_ACER_A500)	+= acer_a500_battery.o
 obj-$(CONFIG_BATTERY_SURFACE)	+= surface_battery.o
 obj-$(CONFIG_CHARGER_SURFACE)	+= surface_charger.o
 obj-$(CONFIG_BATTERY_RK818)	+= rk818_battery.o
+obj-$(CONFIG_CHARGER_RK818)	+= rk818_charger.o
diff --git a/drivers/power/supply/rk818_charger.c b/drivers/power/supply/rk818_charger.c
new file mode 100644
index 000000000..7b67a0b47
--- /dev/null
+++ b/drivers/power/supply/rk818_charger.c
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * rk818 usb power driver
+ *
+ * Copyright (c) 2021 Ondřej Jirman <megi@xff.cz>
+ */
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#define RK818_CHG_STS_MASK		(7u << 4) /* charger status */
+#define RK818_CHG_STS_NONE		(0u << 4)
+#define RK818_CHG_STS_WAKEUP_CUR	(1u << 4)
+#define RK818_CHG_STS_TRICKLE_CUR	(2u << 4)
+#define RK818_CHG_STS_CC_OR_CV		(3u << 4)
+#define RK818_CHG_STS_TERMINATED	(4u << 4)
+#define RK818_CHG_STS_USB_OV		(5u << 4)
+#define RK818_CHG_STS_BAT_TEMP_FAULT	(6u << 4)
+#define RK818_CHG_STS_TIMEOUT		(7u << 4)
+
+/* RK818_SUP_STS_REG */
+#define RK818_SUP_STS_USB_VLIM_EN	BIT(3) /* input voltage limit enable */
+#define RK818_SUP_STS_USB_ILIM_EN	BIT(2) /* input current limit enable */
+#define RK818_SUP_STS_USB_EXS		BIT(1) /* USB power connected */
+#define RK818_SUP_STS_USB_EFF		BIT(0) /* USB fault */
+
+/* RK818_USB_CTRL_REG */
+#define RK818_USB_CTRL_USB_ILIM_MASK		(0xfu)
+#define RK818_USB_CTRL_USB_CHG_SD_VSEL_OFFSET	4
+#define RK818_USB_CTRL_USB_CHG_SD_VSEL_MASK	(0x7u << 4)
+
+/* RK818_CHRG_CTRL_REG1 */
+#define RK818_CHRG_CTRL_REG1_CHRG_EN	BIT(7)
+#define RK818_CHRG_CTRL_REG1_CHRG_VOL_SEL_OFFSET 4
+#define RK818_CHRG_CTRL_REG1_CHRG_VOL_SEL_MASK	(0x7u << 4)
+#define RK818_CHRG_CTRL_REG1_CHRG_CUR_SEL_OFFSET 0
+#define RK818_CHRG_CTRL_REG1_CHRG_CUR_SEL_MASK	(0xfu << 0)
+
+/* RK818_CHRG_CTRL_REG3 */
+#define RK818_CHRG_CTRL_REG3_CHRG_TERM_DIGITAL	BIT(5)
+
+struct rk818_charger {
+	struct device *dev;
+	struct rk808 *rk818;
+	struct regmap *regmap;
+
+	struct power_supply *usb_psy;
+	struct power_supply *charger_psy;
+};
+
+// {{{ USB supply
+
+static int rk818_usb_set_input_current_max(struct rk818_charger *cg,
+					   int val)
+{
+	int ret;
+	unsigned reg;
+
+	if (val < 450000)
+		reg = 1;
+	else if (val < 850000)
+		reg = 0;
+	else if (val < 1000000)
+		reg = 2;
+	else if (val < 3000000)
+		reg = 3 + (val - 1000000) / 250000;
+	else
+		reg = 11;
+
+	ret = regmap_update_bits(cg->regmap, RK818_USB_CTRL_REG,
+				 RK818_USB_CTRL_USB_ILIM_MASK, reg);
+	if (ret)
+		dev_err(cg->dev,
+			"USB input current limit setting failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int rk818_usb_get_input_current_max(struct rk818_charger *cg,
+					   int *val)
+{
+	unsigned reg;
+	int ret;
+
+	ret = regmap_read(cg->regmap, RK818_USB_CTRL_REG, &reg);
+	if (ret) {
+		dev_err(cg->dev,
+			"USB input current limit getting failed (%d)\n", ret);
+		return ret;
+	}
+
+	reg &= RK818_USB_CTRL_USB_ILIM_MASK;
+	if (reg == 0)
+		*val = 450000;
+	else if (reg == 1)
+		*val = 80000;
+	else if (reg == 2)
+		*val = 850000;
+	else if (reg < 11)
+		*val = 1000000 + (reg - 3) * 250000;
+	else
+		*val = 3000000;
+
+	return 0;
+}
+
+static int rk818_usb_set_input_voltage_min(struct rk818_charger *cg,
+					   int val)
+{
+	unsigned reg;
+	int ret;
+
+	if (val < 2780000)
+		reg = 0;
+	else if (val < 3270000)
+		reg = (val - 2780000) / 70000;
+	else
+		reg = 7;
+
+	ret = regmap_update_bits(cg->regmap, RK818_USB_CTRL_REG,
+				 RK818_USB_CTRL_USB_CHG_SD_VSEL_MASK,
+				 reg << RK818_USB_CTRL_USB_CHG_SD_VSEL_OFFSET);
+	if (ret)
+		dev_err(cg->dev,
+			"USB input voltage limit setting failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int rk818_usb_get_input_voltage_min(struct rk818_charger *cg,
+					   int *val)
+{
+	unsigned reg;
+	int ret;
+
+	ret = regmap_read(cg->regmap, RK818_USB_CTRL_REG, &reg);
+	if (ret) {
+		dev_err(cg->dev,
+			"USB input voltage limit getting failed (%d)\n", ret);
+		return ret;
+	}
+
+	reg &= RK818_USB_CTRL_USB_CHG_SD_VSEL_MASK;
+	reg >>= RK818_USB_CTRL_USB_CHG_SD_VSEL_OFFSET;
+
+	*val = 2780000 + (reg * 70000);
+
+	return 0;
+}
+
+static int rk818_usb_power_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct rk818_charger *cg = power_supply_get_drvdata(psy);
+	unsigned reg;
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = regmap_read(cg->regmap, RK818_SUP_STS_REG, &reg);
+		if (ret)
+			return ret;
+
+		val->intval = !!(reg & RK818_SUP_STS_USB_EXS);
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = regmap_read(cg->regmap, RK818_SUP_STS_REG, &reg);
+		if (ret)
+			return ret;
+
+		if (!(reg & RK818_SUP_STS_USB_EXS)) {
+			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		} else if (reg & RK818_SUP_STS_USB_EFF) {
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		} else {
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		}
+
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+                return rk818_usb_get_input_voltage_min(cg, &val->intval);
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+                return rk818_usb_get_input_current_max(cg, &val->intval);
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rk818_usb_power_set_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					const union power_supply_propval *val)
+{
+	struct rk818_charger *cg = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+                return rk818_usb_set_input_voltage_min(cg, val->intval);
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+                return rk818_usb_set_input_current_max(cg, val->intval);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int rk818_usb_power_prop_writeable(struct power_supply *psy,
+					  enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+/* Sync the input-current-limit with our parent supply (if we have one) */
+static void rk818_usb_power_external_power_changed(struct power_supply *psy)
+{
+        struct rk818_charger *cg = power_supply_get_drvdata(psy);
+
+	power_supply_set_input_current_limit_from_supplier(cg->usb_psy);
+}
+
+static enum power_supply_property rk818_usb_power_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
+};
+
+static const struct power_supply_desc rk818_usb_desc = {
+	.name			= "rk818-usb",
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.properties		= rk818_usb_power_props,
+	.num_properties		= ARRAY_SIZE(rk818_usb_power_props),
+	.property_is_writeable	= rk818_usb_power_prop_writeable,
+	.get_property		= rk818_usb_power_get_property,
+	.set_property		= rk818_usb_power_set_property,
+	.external_power_changed	= rk818_usb_power_external_power_changed,
+};
+
+// }}}
+// {{{ Charger supply
+
+static int rk818_charger_set_current_max(struct rk818_charger *cg, int val)
+{
+	unsigned reg;
+	int ret;
+
+	if (val < 1000000)
+		reg = 0;
+	else if (val < 3000000)
+		reg = (val - 1000000) / 200000;
+	else
+		reg = 10;
+
+	ret = regmap_update_bits(cg->regmap, RK818_CHRG_CTRL_REG1,
+				 RK818_CHRG_CTRL_REG1_CHRG_CUR_SEL_MASK,
+				 reg << RK818_CHRG_CTRL_REG1_CHRG_CUR_SEL_OFFSET);
+	if (ret)
+		dev_err(cg->dev,
+			"Charging max current setting failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int rk818_charger_get_current_max(struct rk818_charger *cg, int *val)
+{
+	unsigned reg;
+	int ret;
+
+	ret = regmap_read(cg->regmap, RK818_CHRG_CTRL_REG1, &reg);
+	if (ret) {
+		dev_err(cg->dev,
+			"Charging max current getting failed (%d)\n", ret);
+		return ret;
+	}
+
+	reg &= RK818_CHRG_CTRL_REG1_CHRG_CUR_SEL_MASK;
+	reg >>= RK818_CHRG_CTRL_REG1_CHRG_CUR_SEL_OFFSET;
+
+	*val = 1000000 + reg * 200000;
+
+	return 0;
+}
+
+static int rk818_charger_set_voltage_max(struct rk818_charger *cg, int val)
+{
+	unsigned reg;
+	int ret;
+
+	if (val < 4050000)
+		reg = 0;
+	else if (val < 4350000)
+		reg = (val - 4050000) / 50000;
+	else
+		reg = 6;
+
+	ret = regmap_update_bits(cg->regmap, RK818_CHRG_CTRL_REG1,
+				 RK818_CHRG_CTRL_REG1_CHRG_VOL_SEL_MASK,
+				 reg << RK818_CHRG_CTRL_REG1_CHRG_VOL_SEL_OFFSET);
+	if (ret)
+		dev_err(cg->dev,
+			"Charging end voltage setting failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int rk818_charger_get_voltage_max(struct rk818_charger *cg, int *val)
+{
+	unsigned reg;
+	int ret;
+
+	ret = regmap_read(cg->regmap, RK818_CHRG_CTRL_REG1, &reg);
+	if (ret) {
+		dev_err(cg->dev,
+			"Charging end voltage getting failed (%d)\n", ret);
+		return ret;
+	}
+
+	reg &= RK818_CHRG_CTRL_REG1_CHRG_VOL_SEL_MASK;
+	reg >>= RK818_CHRG_CTRL_REG1_CHRG_VOL_SEL_OFFSET;
+
+	*val = 4050000 + reg * 50000;
+
+	return 0;
+}
+
+static int rk818_charger_get_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      union power_supply_propval *val)
+{
+	struct rk818_charger *cg = power_supply_get_drvdata(psy);
+	unsigned reg;
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = regmap_read(cg->regmap, RK818_CHRG_CTRL_REG1, &reg);
+		if (ret) {
+			dev_err(cg->dev, "failed to read the charger state (%d)\n", ret);
+			return ret;
+		}
+
+		val->intval = !!(reg & RK818_CHRG_CTRL_REG1_CHRG_EN);
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = regmap_read(cg->regmap, RK818_SUP_STS_REG, &reg);
+		if (ret)
+			return ret;
+
+		switch (reg & RK818_CHG_STS_MASK) {
+		case RK818_CHG_STS_WAKEUP_CUR:
+		case RK818_CHG_STS_TRICKLE_CUR:
+		case RK818_CHG_STS_CC_OR_CV:
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case RK818_CHG_STS_TERMINATED:
+		default:
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		}
+
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = regmap_read(cg->regmap, RK818_SUP_STS_REG, &reg);
+		if (ret)
+			return ret;
+
+		switch (reg & RK818_CHG_STS_MASK) {
+		case RK818_CHG_STS_WAKEUP_CUR:
+		case RK818_CHG_STS_TRICKLE_CUR:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+			break;
+		case RK818_CHG_STS_CC_OR_CV:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+			break;
+		case RK818_CHG_STS_TERMINATED:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+			break;
+		}
+
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = regmap_read(cg->regmap, RK818_CHRG_CTRL_REG2, &reg);
+		if (ret)
+			return ret;
+
+		val->intval = 100000 + ((reg >> 6) & 3) * 50000;
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = regmap_read(cg->regmap, RK818_SUP_STS_REG, &reg);
+		if (ret)
+			return ret;
+
+		switch (reg & RK818_CHG_STS_MASK) {
+		case RK818_CHG_STS_USB_OV:
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+			break;
+		case RK818_CHG_STS_BAT_TEMP_FAULT:
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+			break;
+		case RK818_CHG_STS_TIMEOUT:
+			val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+			break;
+		}
+
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+                return rk818_charger_get_voltage_max(cg, &val->intval);
+
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+                ret = rk818_charger_get_current_max(cg, &val->intval);
+		val->intval /= 10;
+		return ret;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+                return rk818_charger_get_current_max(cg, &val->intval);
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		val->intval = 4350000;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = 3000000;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rk818_charger_set_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      const union power_supply_propval *val)
+{
+	struct rk818_charger *cg = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = regmap_update_bits(cg->regmap, RK818_CHRG_CTRL_REG1,
+					 RK818_CHRG_CTRL_REG1_CHRG_EN,
+					 val->intval ? RK818_CHRG_CTRL_REG1_CHRG_EN : 0);
+		if (ret)
+			dev_err(cg->dev, "failed to setup the charger (%d)\n", ret);
+
+		return ret;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+                return rk818_charger_set_voltage_max(cg, val->intval);
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+                return rk818_charger_set_current_max(cg, val->intval);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int rk818_charger_prop_writeable(struct power_supply *psy,
+					enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_ONLINE:
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+static enum power_supply_property rk818_charger_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+};
+
+/*
+ * TODO: This functionality should be in a battery driver/supply, but that one
+ * is such a mess, I don't want to touch it now. Let's have a separate supply
+ * for controlling the charger for now, and a prayer for the poor soul that
+ * will have to understand and clean up the battery driver.
+ */
+static const struct power_supply_desc rk818_charger_desc = {
+	.name			= "rk818-charger",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= rk818_charger_props,
+	.num_properties		= ARRAY_SIZE(rk818_charger_props),
+	.property_is_writeable	= rk818_charger_prop_writeable,
+	.get_property		= rk818_charger_get_property,
+	.set_property		= rk818_charger_set_property,
+};
+
+// }}}
+
+static int rk818_charger_probe(struct platform_device *pdev)
+{
+	struct rk808 *rk818 = dev_get_drvdata(pdev->dev.parent);
+	struct power_supply_config psy_cfg = { };
+	struct device *dev = &pdev->dev;
+	struct rk818_charger *cg;
+	int ret;
+
+	cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
+	if (!cg)
+		return -ENOMEM;
+
+	cg->rk818 = rk818;
+	cg->dev = dev;
+	cg->regmap = rk818->regmap;
+	platform_set_drvdata(pdev, cg);
+
+	psy_cfg.drv_data = cg;
+	psy_cfg.of_node = dev->of_node;
+
+	cg->usb_psy = devm_power_supply_register(dev, &rk818_usb_desc,
+						 &psy_cfg);
+	if (IS_ERR(cg->usb_psy))
+		return dev_err_probe(dev, PTR_ERR(cg->usb_psy),
+				     "register usb power supply fail\n");
+
+	cg->charger_psy = devm_power_supply_register(dev, &rk818_charger_desc,
+						     &psy_cfg);
+	if (IS_ERR(cg->charger_psy))
+		return dev_err_probe(dev, PTR_ERR(cg->charger_psy),
+				     "register charger power supply fail\n");
+
+        /* disable voltage limit and enable input current limit */
+	ret = regmap_update_bits(cg->regmap, RK818_SUP_STS_REG,
+				 RK818_SUP_STS_USB_ILIM_EN | RK818_SUP_STS_USB_VLIM_EN,
+				 RK818_SUP_STS_USB_ILIM_EN);
+	if (ret)
+		dev_warn(cg->dev, "failed to enable input current limit (%d)\n", ret);
+
+        /* make sure analog control loop is enabled */
+	ret = regmap_update_bits(cg->regmap, RK818_CHRG_CTRL_REG3,
+				 RK818_CHRG_CTRL_REG3_CHRG_TERM_DIGITAL,
+				 0);
+	if (ret)
+		dev_warn(cg->dev, "failed to enable analog control loop (%d)\n", ret);
+
+        /* enable charger and set some reasonable limits on each boot */
+	ret = regmap_write(cg->regmap, RK818_CHRG_CTRL_REG1,
+			   RK818_CHRG_CTRL_REG1_CHRG_EN
+			   | (1) /* 1.2A */
+			   | (5 << 4) /* 4.3V */);
+	if (ret)
+		dev_warn(cg->dev, "failed to enable charger (%d)\n", ret);
+
+	power_supply_set_input_current_limit_from_supplier(cg->usb_psy);
+
+	return 0;
+}
+
+static int rk818_charger_remove(struct platform_device *pdev)
+{
+	//struct rk818_charger *cg = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+static void rk818_charger_shutdown(struct platform_device *pdev)
+{
+}
+
+static int rk818_charger_suspend(struct platform_device *pdev,
+				 pm_message_t state)
+{
+	return 0;
+}
+
+static int rk818_charger_resume(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static const struct of_device_id rk818_charger_of_match[] = {
+	{ .compatible = "rockchip,rk818-charger", },
+	{ },
+};
+
+static struct platform_driver rk818_charger_driver = {
+	.probe = rk818_charger_probe,
+	.remove = rk818_charger_remove,
+	.suspend = rk818_charger_suspend,
+	.resume = rk818_charger_resume,
+	.shutdown = rk818_charger_shutdown,
+	.driver = {
+		.name	= "rk818-charger",
+		.of_match_table = rk818_charger_of_match,
+	},
+};
+
+module_platform_driver(rk818_charger_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rk818-charger");
+MODULE_AUTHOR("Ondřej Jirman <megi@xff.cz>");
-- 
2.31.1

